Quantité minimale : 1
Quantité :
Product ID | P11175 |
Accessories (in scope of delivery) | 2 x gasket G3/4 AFM 34 |
Maximum values | Ui = 13.65 V / li = 200 mA / Pi = 0.69 W / Ci = 0.45 nF / Li = 1.80 µH |
Protection [EN 60529] | IP 67 |
Material housing | stainless steel AISI 316 Ti, brass, PA |
Compressive strength | 60 bar |
Sensor length L | 48 mm |
ATEX marking gas | Ex II 2 G Ex ib IIC T6...T3 Gb |
Electrical connection | M12 connector |
Material sensor touched by medium | stainless steel AISI 316 Ti |
Reaction time typ. | 2 s (1 ... 13 s) |
Temperature range dust-Ex | -20 ... 85 °C |
Detection range Oil | 3 ... 200 cm/s |
Process connection | G3/4 |
Output | output with separate Amplifier |
TYPE | ST 106 S |
Associated amplifiers | SZAb 400 EX-GR, SZAb 400 EX-WR115, SZAb 400 EX-WR230, SZAb 400 EX-GA |
Temperature range in T4 | -20 ... 85 °C |
Temperature range in T5 | -20 ... 55 °C |
ATEX Certificate | TÜV 97 ATEX 1218 |
Temperature range in T6 | -20 ... 40 °C |
Ex area uf use | Zone 1, Zone 21 |
Temperature range in T3 | -20 ... 85 °C |
Detection range water | 1 ... 100 cm/s |
ATEX Marking dust | Ex II 2 D Ex ib IIIC T125°C Db |
Medium | Water, oil |
Start-up time typ. | 8 s (2 ... 18 s) |